BDQDB - SOLDER SEAL LIQUID WRENCH NO.1 (POUR)#L1-16

  • MSDS: BDQDB
  • Manufacturer: RADIATOR SPECIALITY CO
  • Product Name: SOLDER SEAL LIQUID WRENCH NO.1 (POUR)#L1-16
  • National Stock Number: 9150-00-262-8990
Product Identification

Product ID:SOLDER SEAL LIQUID WRENCH NO.1 (POUR)#L1-16
MSDS Date:04/01/1987
FSC:9150
NIIN:00-262-8990
MSDS Number: BDQDB

Responsible Party
RADIATOR SPECIALITY CO.
1400 W. INDEPENDENCE
CHARLOTTE, NC 28234
US

Emergency Phone: 704-377-6555

Info Phone: 704-377-6555

Preparer: I. LIEBMAN, TECH DIRECTOR

Cage: 77628

Contractor
RADIATOR SPECIALTY COMPANY
34689 CHARLOTTE, NC 28208 US

Telephone: 704-377-6555/303-623-5716

Cage: 77628

Ingredients

ALIPHATIC PETROLEUM DISTILLATE (KEROSENE)

CAS: 8008-20-6

RTECS: OA5500000

Fraction By Weight: 89-90%

ACGIH TLV: 100 PPM


PETROLEUM MINERAL OIL

CAS: 64742-06-9

Fraction By Weight: 8-9%

ACGIH TLV: 5 MG/CUM MIST


NON-HAZARDOUS COMPONENTS

Fraction By Weight: 1-3%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITANT TO EYES,SKIN AND
RESPIRATORY TRACT;HEADACHE,DIZZINESS,NAUSEA.
CHRONIC:DERMATITIS,IRRITATION.
Explanation of Carcinogenicity:MFR STATES BOTH INGREDIENTS IDENTIFIED
ARE LISTED AS POSSIBLE CARCINOGENS BY NTP; NOT FOUND IN HMIS
REFERENCES.
Effects of Overexposure:EYE:IRRITATION. SKIN:IRRITATION WITH DERMATITIS
WITH REPEATED/PROLONGED EXPOSURE. INHALED:LUNG IRRITATION,DIZZINESS
WITH EXCESSIVE INHALATION,CHEMICAL PNEUMONIA IF ASPIRATED DIRECTLY.
INGESTED:G/I IRR ITATION,NAUSEA.
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:EYE: FLUSH WITH WATER. SKIN: REMOVE CONTAMINATED
CLOTHING,LAUNDER BEFORE REUSE. WASH WITH SOAP & WATER. INHALED:
REMOVE TO FRESH AIR. GIVE OXYGEN,CPR AS NEEDED. INGESTED: DO NOT
INDUCE VOMITING. GET I MMEDIATE MEDICAL ATTENTION. DO NOT
ADMINISTER EPINEPHRINE OR ADRENALIN.

Fire Fighting

Flash Point Method:TCC
Flash Point:OVER 120F/49C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:FIRE MAY BE SPREAD BY USING WATER AS
EXTINGUISHING MEDIUM.

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE IGNITION SOURCES.
CONFINE SPILL. MOP UP AND TRANSFER TO WASTE DRUM FOR DISPOSAL.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA, AWAY FROM
IGNITION SOURCES AND OXIDIZERS.
Other Precautions:KEEP AWAY FROM CHILDREN AND ANIMALS.

Exposure Controls

Respiratory Protection:NIOSH APPROVED SELF CONTAINED OR SUPPLIED AIR
RESPIRATOR.
Ventilation:GENERAL VENTILATION
Protective Gloves:SOLVENT RESISTANT GLOVES AND APRON
Eye Protection:SPLASH GOGGLES OR FULL FACE SHIELD
Other Protective Equipment:ABOVE ARE FOR CONTINUOUS EXPOSURE. FOR USUAL
INTERMITTANT USE, ONLY SAFETY GLASSES ARE NECESSARY.
Work Hygienic Practices:USE NORMAL INDUSTRIAL HYGIENE.
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:OVER 300F
Spec Gravity:0.82
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK LIQUID, PETROLEUM ODOR
Percent Volatiles by Volume:90%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT, IGNITION SOURCES, OPEN FLAME
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS:
SMOKE,CARBON DIOXIDE,CARBON MONOXIDE,SULFUR OXIDES.

Disposal

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
INCINERATION IS SUGGESTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.